Contact Ultera at (949)-367-8800
    USA  
bannertest.gif (7122 bytes)







Where to Buy
About Ultera
FAQs
Articles
Feed Back
Press
Careers
Home
 

 

 

 Products

  Mirage Series
   MirageLITE
   MirageFC
   MirageFCSC

Mirage VTC

  Datasheets

  Specifications
  Quick Start
  RAID Partners
Contact us to configure an Ultera solution to fit your needs

MirageFCSC Virtual Tape Controller (VTC) is the key component of a high performance Virtual Tape Library (VTL).  MirageFCSC increases the performance and reliability of the backup process by creating VTLs using Fibre Channel disk storage systems. The Mirage “Embedded Archive Engine (EAE)” archives virtual tape volumes to conventional tape cartridges using a tape drive(s), autoloader or  tape library.  The archive process is initiated and managed by the MirageFCSC VTC as a background process, without any additional software or host resources.  Archived tape cartridges are created as if the tape was written directly by the application software.
MirageFCSC supports direct server attached as well as SAN fabric connections.  Hardware integration is simple.  It’s also seamless to operating systems and backup applications.

MirageFCSC delivers immediate performance improvements to backup, restore and archival applications.
MirageFCSC supports investments already made in tape drives, libraries and RAID equipment as well as
application software.  Mirage enables users to keep their current configuration in place, no hardware changes, no software changes, no procedural or policy changes. 
MirageFCSC built-in RAIT for archival offers higher performance and increased reliability.
The number of VTL slots and drives is user selectable.  Up to 8 virtual tape drives are supported per controller. Additional controllers can be added for scalability.
MirageFCSC automatically emulates the attached tape drive or library that is present.  In the absence of an archival tape device, a variety of user selectable Tape Library emulations are offered.
MirageFCSC has repositioned tape to its appropriate place as a removable storage device for archival purposes.  
It's that simple!
       MirageFCSC  Specifications             
Server Interconnect
The fabric/server interconnect provides connection between the MirageFCSC VTC and the server or FC network.  2Gb FC transfers provide a sustained backup/restore transfer rate of over 540GB/Hour per controller. Additional VTCs can be added to increase performance.
Disk Storage Interconnect
The disk storage interconnect supports 2Gb FC disk RAID systems.  The MirageFCSC VTC supports up to 80TB of disk storage per controller. Base configuration supports 4TB.
Archival Storage Interconnect
A single MirageFCSC VTC can archive up to 4 SCSI tape drives, standalone or in a tape library.   Additional MirageFCSC VTC can be added for additional archival performance. SCSI drive support allows you to extend your investment in existing SCSI based tape drives, autoloaders, and libraries.
Remote Management Interconnect
The MirageFCSC VTC supports a 10/100 Ethernet RJ45 port for remote management using an easy to use browser based GUI to monitor and control Mirage Virtual Tape Library and Archival operations. 
Operator Console
The front panel operator console features a 4 line by 20 character display and 4 push button key pad.
  MirageFCSC Models
VT820FS 5 1/4" Half Height internal packaging with front panel operator console
VT1020FS
Table Top external packaging with power supply and front panel operator console
VT2120FS
Single Controller Board, 1U high 19 inch rackmount with power supply and front panel operator console
VT2220FS
Dual Controller Boards,1U high 19 inch rackmount with 2 power supplies and 2 front panel operator consoles
One Year Warranty
 Dimensions Width Depth Height 
5 1/4" Half Height 5.75" 9.20" 1.67"
Low Profile Table Top 9.75" 11.00" 2.50"
Rackmount 17.00" 23.31" 1.75"
Environment (Exclusive of Drives)
POWER
Input Voltage +5VDC, 10%
Supply Current 3.5 amps, max
TEMPERATURE
Operating 5 degree C to 50 degree C
Non-operating -40 degree C to 60 degree C
HUMIDITY
Operating 10% to 80% non-condensing
Non-operating 10% to 90% non-condensing
Half Height
Dual Controller 1U Rackmount
5 1/4" Internal 
Half Height
Low Profile 
Table Top
Rackmount
         

Ultera Systems, Inc.
26052 Merit Circle · Laguna Hills, CA 92653
Phone: 949.367.8800 · Fax: 949.367.0758
E-mail: inform@ultera.com
Visit us at www.ultera.com

© 1994-2007. Ultera Systems, Inc.  All Rights Reserved.  All logos are property of their respective owners.,  Legal Information
| Site Map | Ultera Solutions | High Performance | Disaster Recovery | Data Archiving | Media Duplication | Video Streaming | CD-R Mastering | DVD-R Mastering | Ultera Products | Tape RAID Controller | Tape Striping | Tape Mirroring | Tape Library Striping | Tape Library Mirroring | Optical RAID Controller  | Optical Striping | Optical Mirroring | Optical Library Striping | Optical Library Mirroring  | Remote ManagementWhere to Buy  | About Ultera | FAQ | ArticlesFeedback | Press | Careers | Home |